Several commenters on these posts have indicated that maybe it’s time to move away from stability shoes and give neutral shoes a try. I thought I’d share a few thoughts on this as I don’t necessarily think this is the way to approach things when it comes to running footwear.
Do Pronation-Control Categories Mean Anything?
One of the biggest problems with making neutral a goal is that it assumes that “stability” and “neutral” are actual categories with well defined limits and precise meaning. I don’t believe this to be the case. As far as I’m aware, and correct me if I’m wrong, there are not hard criteria a shoe must meet in order to be classified as a stability or a neutral shoe. It seems that a medial post or some other type of pronation control “technology” is all that’s needed to make a shoe fall into the stability category.
Having run in a lot of shoes over the past few years (I’ve lost count, but wouldn’t be surprised if it’s over 75 now), I’ve rarely found the stability/neutral categorizations to be very helpful - I run in both with little issue. In fact, I’ve run recently in both the Saucony Guide 5 (stability) and Ride 5 (neutral) and I’ll be darned if I could tell you which is which if I put them on with my eyes closed. I’ve even run in neutral shoes with firm soles that almost feel too stable (e.g., many adidas shoes such as the adios 2 and Feather 2).
I think the reality is that there’s way more to making a shoe “stable” than just throwing a medial post on it (and it’s even debatable how effective posts are – gait expert and PT Jay Dicharry once told me that it’s one of the least effective methods of improving shoe stability since the foot pronates most after the post has left the ground during stance). If we define stability as a shoe that minimizes inward roll of the foot (what we runners colloquially refer to as pronation), I personally find that stability is mainly a function of cushioning firmness (firmer = more stable), cushioning amount (thinner sole = more stable), and shoe width (narrow shoes make me feel less stable). I also find torsional (twisting) flexibility to be important – stiff shoes with thick soles feel very slappy to me and I suspect they increase pronation velocity.
Another problem with making “neutral” a goal to strive for is that I don’t really know what neutral as a category means (or that neutral has any meaning for the foot either – read this post by Ian Griffiths for more on this). Some neutral shoes are so soft that they cave medially and cause the foot to pronate way more than it ever would when barefoot (like my wife’s foot in the Nike Free 5.0 at the top of this page; see also this post which hones in on this aspect of neutral shoes). Some are so firm that they feel more stable than a lot of “stability” shoes. The New Balance MT110 is a neutral trail shoe, but because the sole in my pair is so slanted from lateral to medial I can feel it forcing my foot to evert just standing in them – they gave me a case of posterior tibial tendinitis after a long trail run.
Look at the photos below for an example of how three “neutral” shoes can behave differently on the same person – this demonstrates well the lack of a standard response within a category:
adidas adizero Adios 1 (right) with high and narrow sole rolls over medially. Nike Lunar Racer (middle) with wide sole is more stable, and Asics Piranha (left) with lower profile has less tendency to tilt.
Here’s the same person showing foot movement barefoot and in stability and neutral shoes – the neutral shoe appears to cause a lot more inward roll than when he is barefoot:
Does Shoe Motion Correlate With Foot Motion?
An entirely separate issue is the fact that how a shoe moves may have little correlation with how the foot moves inside the shoe. For example, here is the Abstract of a classic 2000 paper by Alex Stacoff that tried to differentiate shoe movement from the actual movement of the foot inside the shoe by inserting pins into the foot and leg bones:
Abstract
Barefoot running kinematics has been described to vary considerably from shod running. However, previous investigations were typically based on externally mounted shoe and/or skin markers, which have been shown to overestimate skeletal movements. Thus, the purpose of this study was to compare calcaneal and tibial movements of barefoot versus shod running using skeletal markers. Intracortical bone pins with reflective marker triads were inserted under standard local anesthetic into the calcaneus and tibia of five healthy male subjects. The subjects ran barefoot, with a normal shoe, with three shoe soles and two orthotic modifications. The three-dimensional tibiocalcaneal rotations were determined using a joint coordinate system approach. Test variables were defined for eversion and tibial rotation. The results showed that the differences in bone movements between barefoot and shod running were small and unsystematic (mean effects being less than 2°) compared with the differences between the subjects (up to 10°). However, differences may occur during midstance when extreme shoe modifications (i.e. posterior orthosis) are used. It is concluded that calcaneal and tibial movement patterns do not differ substantially between barefoot and shod running, and that the effects of these interventions are subject specific. The result of this in vivo study contrasts with previous investigations using skin and shoe mounted markers and suggests that these discrepancies may be the result of the overestimation with externally mounted markers.
The point made by this study is that the movement we see when looking at the shoe from behind may not actually reveal much about how the foot inside the shoe is moving. In other words, a stability shoe may look like it keeps the foot in a more “neutral” position, but the foot may simply be pronating inside the shoe just as much as it would when barefoot.
The Origin of Pronation Control
Another thing to consider is why pronation control devices in shoes were developed in the first place – was the original goal to correct a problem with our feet? I’m not so sure…
The footwear trend in the 1970’s was to add additional cushioning to shoes, particularly under the heel. The reason for this was that Achilles tendon problems were among the most commonly reported injuries in the early 70’s, and lifting the heel was thought to reduce strain on the Achilles. I have also heard that adding cushion was also done to accommodate a changing demographic of runners (new to the sport, perhaps not as fit) – read this book excerpt for more on running injuries/shoes in the 1970’s. However, adding cushion seemed to have some side effects. The late 1970’s saw a decrease in Achilles problems, but a dramatic increase in knee injuries. The latter were thought to be linked to reduced rearfoot control due to the cushioning added to shoes. Excessive rearfoot movement was linked to excessive internal tibial rotation (i.e., the shin twisting inward), which was in turn thought to contribute to the development of problems at the knee. This gave rise to the addition of pronation control elements in an effort to control the rearfoot and save the knee (knee injuries are still by far the most common running injury).
Benno Nigg, one of the scientists who was heavily involved with the study of shoes during this time period (and is still a major researcher in the shoe world today) has since stated that attempting to control foot motion was a mistake – here’s a snippet from a 2010 Runner’s World article featuring Nigg:
“…In the early 1980s, Nigg was working as a consultant for Nike on its line of tennis shoes. While there, he offered input on the need to add more structure to Air models because the much-lauded Air units created even more instability than traditional foam. "I pushed the cushioning trend as much as anyone," the broad-shouldered Nigg says in his Swiss accent. "And I take the blame for pronation devices as well."”
So the reality is that pronation control technology seems to have appeared to correct problems caused by the addition of cushion and heel lifts to shoes. It was a new element added to shoes to correct for problems created by another new element. (If you are interested in footwear history from the 1970’s, I highly recommend that you read The Running Shoe Book from 1980 by Peter Cavanagh).
In fact, I don’t get the feeling that the appearance of pronation control had anything to do with correcting an inherent problem with our feet (it was correcting a problem with our shoes!). Unfortunately, it has morphed into that for many runners today who feel that they “need” stability because they are an “overpronator” – in this sense overpronation has come to be treated almost as a pathological condition that needs correction lest you want to endure certain pain and suffering.
How Do You Find the Right Shoe?
What can we make of all of this, and how should runners find the right shoe?
I prefer to think of shoes in much the same way I look at runners – each is an individual with its own properties. I’m not at all a fan of footwear categories because there is no defining set of criteria that can be applied to each category, and no standardization as to just how stable a given shoe is. In a similar manner, I don’t like using “minimalist” to define a specific category as there is such a huge amount of variation in what different people would put into it. Is the Saucony Kinvara minimalist? How about the Altra Instinct? Thus, I don’t find the categories “stability” and “neutral” to be all that informative and basically just ignore them now when choosing shoes for myself.
My general feeling is that unless an individual runner has a specific pathology that has been linked to increased injury risk, they should aim to find a shoe that allows their feet to move as they want to move. Don’t attempt to control foot movement, and don’t wear something that is going to cause the foot to move even more than it would on its own. I do think video analysis can help with this to a degree, but keep in mind that we typically only see how much the shoe moves – it’s much harder to discern how much the foot is moving inside the shoe.
Don’t focus too much on categories, focus more on how individual shoes feel – comfort is good, and specifically comfort while running in a shoe, not while standing in it in a store. Benno Nigg, the scientist mentioned above, stated in an article by Amby Burfoot that “Comfort is not easy to define, but it's ‘probably the most important variable’ for sport-shoe selection.” I would agree with him – I can usually tell after a single run whether a shoe is going to work for me, and it mainly has to do with knowing how a lot of different shoes feel on my feet. A shoe that feels comfortable on the very first run is generally one that stays in my rotation for the long term. I would also agree that comfort is hard to define, but for me I think it’s mainly just how good a shoe is at letting my body do its thing without getting in the way – a comfortable shoe is one that I barely even notice when I run.
The challenge is helping runners who aren’t shoe reviewers with access to large numbers of shoes figure out their own comfort zone – my feeling is that’s where the human factor comes in. Rely on your shoe-geek friends, knowledgeable and open minded specialty store clerks, and others with extensive shoe and running experience to help you out. One day I hope science will have better answers for us on how best to fit shoes, but I don’t think we’re there yet, and until then it remains more an art and a personal journey. It’s a journey that need not have neutral as its end goal.
:.